25697 - NTK Oxygen (O2) Sensor


Images May Not be Vehicle Specific. For Display Purposes Only.

Images Of This Specific Part Number

Non-Specific Images

Place Order Here

Part #: 25697
Notes: OE Type 4-Wire A/F Sensor
MSRP: $676.41
Your Price: $280.72

Specs

Mounting Bracket Included No
Sensor Type Heated
Thread Diameter 18.000
Thread Length 0.38
Wire Quantity 4
Wiring Harness Length 13.8

All Fitments

LEXUS
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1998 - 1999 ES300 ALL V6 3.0 ALL ALL ALL Position: Upstream Front; B2S1;
1998 - 1999 ES300 ALL V6 3.0 ALL ALL ALL Position: Upstream Rear; B1S1;
1999 - 2003 RX300 ALL V6 3.0 ALL ALL ALL Position: Upstream Front; B2S1;
1999 - 2003 RX300 ALL V6 3.0 ALL ALL ALL Position: Upstream Rear; B1S1;
TOYOTA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1997 - 1999 AVALON ALL V6 3.0 ALL ALL ALL Position: Upstream Front; B2S1;
1997 - 1999 AVALON ALL V6 3.0 ALL ALL ALL Position: Upstream Rear; B1S1;
1998 - 2000 CAMRY ALL V6 3.0 ALL ALL ALL Position: Upstream Front; B2S1;
1998 - 2000 CAMRY ALL V6 3.0 ALL ALL ALL Position: Upstream Rear; B1S1;
2001 - 2003 HIGHLANDER ALL V6 3.0 ALL ALL ALL Position: Upstream Front; B2S1;
2001 - 2003 HIGHLANDER ALL V6 3.0 ALL ALL ALL Position: Upstream Rear; B1S1;
1998 - 2000 RAV4 ALL L4 2.0 ALL ALL ALL Position: Upstream; B1S1;
1999 - 2000 SIENNA ALL V6 3.0 ALL ALL ALL Position: Upstream Front; B2S1;
1999 - 2000 SIENNA ALL V6 3.0 ALL ALL ALL Position: Upstream Rear; B1S1;
1999 - 2000 SOLARA ALL V6 3.0 ALL ALL ALL Position: Upstream Front; B2S1;
1999 - 2000 SOLARA ALL V6 3.0 ALL ALL ALL Position: Upstream Rear; B1S1;

Product Description

Oxygen (O2) Sensors are used in modern automobiles to control the fuel and ignition systems to optimize a car’s performance in the areas of emissions and fuel economy. Sensors are located before and after the catalytic converter to check on the amount of oxygen in the exhaust. The sensor sends signals to the car’s on-board computer, which then can adjust several variables, including air/fuel ratio and timing, in order to bring the engine into the optimum operating range.

Each NTK Oxygen (O2) Sensor is:

  • Extensively Tested During Manufacture to Guarantee Quality and Reliability
  • Supplied With a Factory-Fitted OEM Connector for Easy Installation
  • Precision manufactured with a sensing element incorporating NTK’s premier technical ceramics

Oxygen (O2) Sensors should be tested at each tune-up. Failed or worn out oxygen sensors can cause:

  • Failed Emission Tests
  • Increased Fuel Consumption
  • Failed Catalytic Converters
  • Poor Driveability
  • Increased Emissions

Product Reviews

Be the first to review this item.

Rating
Title
Review